Importing A Registry File - Intermec Data Collection PC User Manual

Importing a Registry File

Once you have extended the Configuration application on a 5020, you can import the
customized registry file into another 5020. You may also need to import the registry file
if you cold boot the 5020.
Note: If you cold boot the 5020, you will lose all registry changes and extensions.
Make sure you export the registry file on your development PC and save a backup copy.
To import a registry file
1. Copy the registry file from your development PC to the 5020. For help, see
2. On the 5020, choose Run from the Start menu.
3. Type this command and choose OK:
4. Repeat Steps 1 through 3 for each 5020.
Note:
featured registry import application.
C9
Ng
Chapter 5, "Managing Your 5020."
itcconfig.exe filename.reg
where filename.reg is the name of your customized registry file for the
Configuration application.
is only designed to import 5020 properties. It is not a full-
ITCCONFIG.EXE
Extending the Configuration Application
D
D-9