Intermec Data Collection PC User Manual page 66

5020 Data Collection PC User's Manualdfdf
The PC card slot is located on the top of the 5020 just above the laser scanner window
or tethered scanner port. You can use a Type I or Type II PC card in the slot.
Note: The Windows CE file system is sensitive to the order of storage card recognition
when you change storage cards. When you are inserting or removing a storage PC
card, follow the steps described in this section to avoid changing the designation of
storage cards in the file system.
To insert a PC card
1. Press
2. Make sure an extraction tab is applied to the PC card.
3. Open the slot door on the top of the 5020. The slot door drops down to reveal the
4. Insert the card in the slot connector end first with the single-walled notch on the left
2-28
dfdf
'
to turn on the 5020.
PC card slot.
5020U041.eps
edge of the card.
Card latch
Single
notch
Slot door
Extraction
tab
5020U044.eps