Intermec Data Collection PC User Manual page 366

5020 Data Collection PC User's Manual
Example 1
In this example, change the Scanner Selection options from a list of eight scanners or
input devices to a list of three input devices.
Scanner Selection in the Local Configuration Application
To change the Scanner Selection options
1. Follow the instructions earlier in this section to connect the 5020 to your
2. Edit the 5020 registry.
3. Open the Scanner Selection branch of the registry as shown below.
4. Edit the ChoiceFmt line. The current ChoiceFmt line is:
D-6
Co d e 39
Nugg
development PC.
"ChoiceFmt"="0#Intermec Compatible¦4#Intermec 1545¦7#Intermec
IID¦8#Intermec 155X¦10#Internal¦11#Internal long range¦
12#Internal extra long range¦13#Internal raster"
Remove the Scanner Selection options 4, 7, 8, 12, and 13 as shown.
"ChoiceFmt"="0#Intermec Compatible¦10#Internal¦11#Internal
long range"