Setting A Password - Intermec Data Collection PC User Manual

5020 Data Collection PC User's Manual
4-14

Setting a Password

You can prevent unauthorized people from gaining access to information on the 5020
by setting a password. You must enter the password to gain access to features that you
do not want the user to change.
To set a password
&
1. In the Control Panel, use the cursor keys to highlight the Password icon.
2. Press . The Password Properties dialog box appears.
3
3. Type a password in the Password text box.
3
4. Press and retype the password in the Confirm password text box.
4
5. Press to move to the System Security box.
&
6. Press to Enable Security.
7. Press to exit and save your changes.
You need to warm boot the 5020 or select Go to User Mode from the Start Menu for
your changes to take effect. For more on warm booting the 5020, see "Warm Booting
the 5020" in Chapter 9. The Start menu options are then changed. You will now see that
Go to Admin Mode has replaced Go to User Mode and that you cannot change the
settings or run applications not listed in Programs.
Note: After a cold boot, password settings are reset to no password.