Intermec Data Collection PC User Manual page 90

5020 Data Collection PC User's Manual
Helveticcond blk
4. On your desktop PC, turn off the Active Desktop if you have it enabled. To turn it
5. On your desktop PC, launch version 4.0 or higher of Internet Explorer or Netscape
6. If you access the Internet by using a proxy server, add the IP address to the proxy
7. In the browser Address field, type the 5020 IP address or the serial port IP address
3-14
39
jjj
Note: The 5020 must be turned on and must remain on while you manage it through
the remote Unit Management application. If you have an RF 5020, it must be in
range of an access point.
off, right-click on the desktop and choose Active Desktop.
For a serial connection on a Windows NT PC, you need to look up the IP address
for your PC's serial port. In the Programs/Administrative Tools menu, use Remote
Access Administration. From the Server menu, choose Communication Ports and
then select Serial/COM port. Choose the Port Status button. The IP address is in the
Remote Workstation section.
Commander.
server exceptions list for every 5020 you want to manage. Use the Internet options
in your browser to change the proxy server settings.
that you want to configure and then press Enter:
xxx.xxx.xxx.xxx
where xxx.xxx.xxx.xxx is the IP address of the 5020.
The Unit Management login screen appears on your desktop PC.