Intermec Data Collection PC User Manual page 333

Default Configuration for Network Communications (Ethernet and Radio)
Parameter
5020 IP Address
Access Point MAC Address
Access Point Name
Configuration Manager Enable
Configuration SubAgent Enable
Default Router
DHCP (Obtain IP Address Via DHCP)
Primary DNS Server
Primary WINS Server
Radio MAC Address
Radio ROM Version
RF Domain
RF Inactivity Timeout
RF Roaming Allowed
RF Security Identification (ID)
RF Transmit Mode
Secondary DNS Server
Secondary WINS Server
Subnet Mask
TCP/IP Extensions Delayed Acknowledgement Timer
TCP/IP Extensions Initial Roundtrip Time
TCP/IP Extensions Receive Window Size
TFTP Resend Limit
TFTP Timeout
Note: The RF security ID is stored internally in the OpenAir radio card rather than
being stored in permanent memory on the 5020.
5020 Specifications
Default
0.0.0.0
Not applicable (read-only)
Not applicable (read-only)
Enabled
Enabled
0.0.0.0
Enabled
0.0.0.0
0.0.0.0
Not applicable (read-only)
Not applicable (read-only)
0
5 seconds
Allowed
None
Auto
0.0.0.0
0.0.0.0
0.0.0.0
200 ms
3000 ms
8192 bytes
100
500 ms
A
Saved on Cold Boot
Yes
Not applicable
Not applicable
Yes
Yes
Yes
Yes
Yes
Yes
Not applicable
Not applicable
Yes
Yes
Yes
Yes (see Note)
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
A-9