Virtual Wedge - Intermec Data Collection PC User Manual

5020 Data Collection PC User's Manual

Virtual Wedge

Purpose: Enables or disables the virtual wedge for the internal scanner or the input device that is
connected to the tethered scanner port. The virtual wedge retrieves scanned Automatic
Data Collection (ADC) data and sends it to the keypad driver so that the 5020 can
receive and interpret the data as keypad input.
Configuration: Use one of these methods:
In the Configuration or Unit Management application, choose Configure and then Data
Collection. Next, choose Virtual Wedge and finally choose Virtual Wedge. For help,
see Chapter 3, "Configuring the 5020."
On Cold Boot: Not saved
SNMP OID: 1.3.6.1.4.1.1963.15.3.2.1.1.2.1
Options: Acceptable values for the Virtual Wedge parameter are:
0
1
Default: Enabled
8-96
Nugg
Configuration
Applications SNMP
Yes Yes
Disabled
Enabled
Co d e 39
Bar Codes
No