Table of Contents
Advertisement
TFTP Resend Limit
Purpose:
The TFTP resend limit identifies the maximum number of resent data blocks during a
Put to server request.
Configuration:
Use one of these methods:
In the Configuration or Unit Management application, choose Configure and then
Network. Next, choose Protocols, then TFTP, and finally choose Resend Limit. For
help, see Chapter 3, "Configuring the 5020."
On Cold Boot:
Saved
SNMP OID:
1.3.6.1.4.1.1963.10.3.3.1.11.0
Options:
An acceptable value for the TFTP resend limit is any value from 10 to 10,000.
Default:
100
TFTP Timeout
Purpose:
The TFTP timeout sets the amount of time that the 5020 will wait for a response from a
TFTP server.
Configuration:
Use one of these methods:
In the Configuration or Unit Management application, choose Configure and then
Network. Next, choose Protocols, then TFTP, and finally choose Timeout. For help, see
Chapter 3, "Configuring the 5020."
On Cold Boot:
Saved
SNMP OID:
1.3.6.1.4.1.1963.10.3.3.1.10.0
Options:
An acceptable value for the TFTP timeout is any value from 200 to 25,000 ms.
Default:
500 ms
Co d e 39
Nugg
Configuration
Applications
SNMP
Yes
Yes
Configuration
Applications
SNMP
Yes
Yes
Configuration Command Reference
Bar Codes
No
Bar Codes
No
8
8-91
Advertisement
Table of Contents
Need help?
Do you have a question about the Data Collection PC and is the answer not in the manual?
Questions and answers