Intermec Data Collection PC User Manual page 399

TCP/IP (continued)
Extensions Initial Roundtrip Time command, 8-89
Extensions Receive Window Size command, 8-90
protocol stack, subnet mask, 8-87
reader commands, using, 7-3
TCPIPC.DLL, 6-17
telecommunications components, labeling, 8-19
temperature
5020, using in cold areas, 9-16
specifications, A-4
terminology, defined, xvii
tethered scanner
attaching, 2-33
input devices for, A-7
Scanner Mode command, 8-66
Scanner Selection command, 2-36, 8-68
supported, 2-33
virtual wedge, enabling, 8-96
TextFmt property value, D-18
TFTP
ITCTftpClient, 6-6
Resend Limit command, 8-91
Timeout command, 8-91
threads, viewing for specific processes, 5-25
three low beeps, meaning, 2-7
threshold, SNMP trap, 8-86
time and date
configuring, 1-12, 4-7
Set Time and Date reader command, 7-8
using regional settings, 4-16
timeout
display backlight, configuring, 4-11, 8-42
RF Inactivity Timeout command, 8-62
scanner mode command, 2-36
scanner, configuring, 8-66, 8-70
TFTP, 8-91
timer
receive, controller connect check, 8-33
send, controller connect check, 8-34
TCP/IP extensions delayed acknowledgement, 8-88
TMF Reader commands, 6-7
transmit mode, RF, 8-65
trap, SNMP
authentication, 8-84
community name, 8-85
IP address, 8-85
port, 8-86
threshold, 8-86
Trigger Mode command, scanner, 2-37, 8-72
troubleshooting
5020 running slowly, 9-6
5020 showing the wrong settings under 5020, 9-6
adjusting the memory allocation, 4-18
Application Manager error messages, 9-13
audio signals, list of, 2-7
troubleshooting (continued)
bar code decoded incorrectly, 9-5
batteries, 9-15
Bridge Battery Very Low message, 9-15
configuration commands, scanning
nothing happens, 9-8
three low beeps after scanning, 9-8
Data Buffer icons blink, 9-6
DHCP unable to obtain IP address, 9-4
Ethernet card, problems configuring, 9-7
host cannot initiate communications, 9-5
installing an application, 5-28
Main Battery Very Low message, 9-14
mini-Notepad, 9-6
network loopback, using, 8-52
network parameters, problems setting, 9-7
nothing opens in right-hand window of Unit
Management, 9-9
operating system image, upgrading, 9-13
parameters missing or Not Available, 9-8
PC card not recognized, 9-4
Radio Connect icon blinks, 9-6
Radio Connect icon not displayed, 9-6
radio or Ethernet parameters did not take effect, 9-7
scanning bar codes, 9-11
Ser_EstablishConnection Recvd Header Error, 9-13
SNMP does not work, 9-7
Start menu, closing, 9-4
Unable to apply new value, 9-10
unable to load a file, 9-6
Unit Management
cannot find 5020 IP address, 9-9
Configure menu will not load, 9-9
crashes when resizing window, 9-10
screen goes blank or becomes jumbled, 9-10
Visual Studio connection, 6-19, 9-7
Windows CE Services, unable to connect, 5-42, 9-5
turning off the 5020, automatically, 4-15, 8-10
turning on the 5020, 1-11
Type I and II cards, 2-27, 2-30
Type property value, D-18
typing
accent marks, 2-10
characters on the keypad, 2-12
TZ2400 battery charger
charging the main battery pack, 2-23
cold temperatures, guidelines, 9-16
description and illustration, 1-4
U
UCC/EAN Code 128, enabling, 8-30
UDP Plus
Acknowledgement Delay Lower Limit command, 8-9
Acknowledgement Delay Upper Limit command, 8-9
configuration commands, using, 8-3
I
Index
I-19