Table of Contents
Advertisement
Communications Properties Dialog Box
3. Type a device name (without any spaces) that is up to 15 characters long.
4. Press
5. Type a short description for the device that is up to 50 characters long. The
6. Press
7. To save the device name permanently so that it will be restored after a cold boot,
8. Choose Programs and then Configuration.
9. Press
10. Select Network and then press
Customizing the 5020 Using the Control Panel
3
to go to the device description field.
&
description is an optional field which is not used.
to exit and temporarily save your changes.
you need to use the Configuration application to change a network parameter. Press
to open the Start menu.
"
to access the Configure menu.
&
. The Network configuration screen appears.
4
4-5
Advertisement
Table of Contents
Need help?
Do you have a question about the Data Collection PC and is the answer not in the manual?
Questions and answers