Bowflex TreadClimber TC100 Service Manual page 98

16. Inspect the alignment of the Walking Belts. If the belt is track-
ing too far on a side, turn the Belt Tensioning Screw on that side
a full turn.
17. Plug in the fitness machine into an appropriately rated outlet.
Note: The TC100 TreadClimber
plug directly into a properly wired and grounded three prong 120V
outlet. If you connect the machine to an outlet with GFI (ground
fault interrupt) or AFI (arc fault interrupt), machine operation can
cause the circuit to trip.
18. Standing adjacent to the machine, turn on the belts and run at
1.5 mph for about a minute.
19. Inspect the alignment. If necessary, continue to adjust the Belt
Tensioning Screw until aligned.
20. Final Inspection
Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully as-
sembled and inspected for correct performance in
accordance with the Owner's Manual.
fitness machine is designed to
®
98