15. Using a #2 Phillips screwdriver, remove the four indicated
screws from the Console Assembly.
16. Slightly pivot the Console Bezel Assembly.
Note: Do not crimp the cables.
Upper I/O Cable
17. Disconnect the upper I/O Cable from the Console Board. Gently remove the
cable by pulling it out as the new upper I/O Cable is routed into place.
Note: Do not crimp the cables.
18. Plug in the new upper I/O Cable to the Console Board.
Note: Do not crimp the cables.
19. Reattach the Console Bezel Assembly to the Console Assembly
Note: Do not crimp the cables.
57