Bowflex TreadClimber TC100 Service Manual page 63

11. Slide the Motor Compartment Cover off of the machine.
12. On the Motor Control Board, disconnect the Motor Power Wires by
releasing the clip and pulling straight out on the Connectors – do not pull
on the wire itself.
INPUT/OUTPUT
(I/O CABLE)
TACH CABLE
MOTOR POWER
RED
WIRES
BLACK
13. Using a #2 Phillips screwdriver, detach the Grounding Wire from the
Base Assembly.
14. Using a 10mm wrench, remove the 4 indicated lock nuts that secure
the Motor Assembly.
15. Remove and replace with the new Motor Assembly.
BLACK
AC POWER
WHITE
WIRES
YELLOW/GREEN
63
Motor Assembly
Motor Power
Wires
Grounding Wire