Bowflex TreadClimber TC100 Service Manual page 88

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the
!
wall outlet and the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power
cord in a secure location.
1. Unplug the power cord from the machine and wait 5 minutes.
2. Using a #2 Phillips screwdriver, remove the 6 indicated screws from
the Rear Step.
3. Remove the Rear Step.
4. Remove the Drive Belt. Turn the Drive Pulley clockwise while forcing
the Drive Belt to the outside. The Belt will come off of the Drive and Motor
Pulley.
Keep fingers out of any pinch opportunities when turning
the Pulleys.
Drive Pulley
Motor Pulley
88