Bowflex TreadClimber TC100 Service Manual page 58

20. Gently pull the old lower I/O Cable from the right Upright. Be sure not
to crimp the new lower I/O Cable as it is routed into place.
Note: Do not crimp the cables.
21. Disconnect the old I/O Cable and discard.
22. Connect the new lower and upper I/O Cables and attach the Console
Assembly.
Note: Do not crimp the cables.
23. Installation is the reverse of this procedure.
In order to avoid possible serious injury, when inserting the
tube ends into the Base Assembly be careful to avoid
fingers or hands being caught or pinched.
24. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
58