Bowflex TreadClimber TC100 Service Manual page 40

9. Using a #2 Phillips screwdriver, remove the two indicated Phillips
head screws from the Console Main Body.
Note: To assist with re-assembly, note the type of screws.
10. Remove the Console Media Support Tray.
11. After noting how they route through the Console Main Body,
remove the Cables from the Console Main Body.
Note: Do not crimp or damage any Cables.
12. Place the Console Bezel Assembly on the new Console Main
Body, and route the Cables through it.
Note: Do not crimp the cables.
40