Bowflex TreadClimber TC100 Service Manual page 69

INPUT/OUTPUT
(I/O CABLE)
TACH CABLE
MOTOR POWER
RED
WIRES
BLACK
GROUND: MOTOR TO FRAME
GREEN WITH YELLOW STRIPE
EXTRA WIRE SECURED WITH TIE
DRIVE MOTOR
19. Replace Power Cord and test machine for proper operation. NO CALIBRATION IS NECESSARY for this model.
20. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's
Manual.
BLACK
WHITE
YELLOW/GREEN
TACH CABLE
TWISTED RED/BLACK/BLUE
EXTRA WIRE SECURED WITH TIE
TACH SENSOR
RED
AC POWER
WIRES
Note: Cover removed from Motor Control Board.
MOTOR CONTROL
BOARD
BLACK
GROUND
MOTOR TO FRAME
GREEN WITH YELLOW STRIPE
POWER
MCB TO MOTOR
69
COMMUNICATION CABLE
FROM CONSOLE TO MCB
GREY
BLACK
WHITE
POWER
INLET TO MCB
WIRES TWISTED 1 TWIST PER INCH
POWER
INLET ENCLOSURE
GROUND WIRE CONNECTED INSIDE INLET
GREEN WITH YELLOW STRIPE