Moving Your Machine; Leveling Your Machine - Bowflex TreadClimber TC100 Service Manual

Moving Your Machine

The TreadClimber fitness machine weighs approximately 158 lbs (71.8 kg) when fully assembled
®
and requires caution when being moved. Use the Transport Hand Bar found under the front of
the machine to move it. To get access to the Transport Hand Bar, turn the Levelers until you have
sufficient clearance between the machine and floor.
Your machine can be rolled on the transport wheels to a new location. Lower your machine slowly into
its new location without injury to your head or fingers.
Do not use the uprights, handlebars, or the Console to lift or move the machine. Injury
to you or damage to the machine can occur.
The machine may be moved by one or more persons depending on their physical
abilities and capacities. Make sure that you and others are all physically fit and able to
move the machine safely.
Place the machine on a clean, hard, level surface, free from unwanted material or other
objects that may hamper your ability to move freely. A rubber mat should be used below
the machine to prevent the release of static electricity and protect your flooring.
For safe storage of the machine and to prevent unsupervised operation of the machine always remove the Safety Key and
disconnect the power cord from the wall outlet and the AC input. Place the power cord in a secure location

Leveling Your Machine

Levelers are found on the front of the TreadClimber
adjust:
1. Loosen the upper locking nut.
2. Turn the leveler to adjust the height.
3. Tighten the upper locking nut to lock the leveler.
Do not adjust the levelers to such a height that they
detach or unscrew from the machine. Injury to you or
damage to the machine can occur.
machine. Make sure the TreadClimber
®
13 mm
6
machine is level and stable before you exercise. To
®