5. With assistance, carefully set the machine on to the left side.
Do not move the machine without aid. Injury to you or
damage to the machine can occur. The Treadles and Walking
Belts can abruptly move. To avoid possible serious injury,
keep hands away from the inside of the Treadles and the
edges of the Walking Belts.
6. Loosen the two indicated screws and remove the Right Side Cover.
7. On the Motor Control Board, disconnect the A/C Power Wires by
releasing the clip and pulling straight up on the Connectors – do not pull
on the wire itself.
INPUT/OUTPUT
(I/O CABLE)
TACH CABLE
MOTOR POWER
RED
WIRES
BLACK
8. Remove the 2 indicated screws from the A/C Inlet using a #2 Phillips
screwdriver.
BLACK
AC POWER
WHITE
WIRES
YELLOW/GREEN
32
AC Power Wires