Bowflex TreadClimber TC100 Service Manual page 79

5. The Drive Belt is located on the left and is exposed.
6. With assistance, carefully set the machine on to the right side.
Do not move the machine without aid. Injury to you or
damage to the machine can occur. The Treadles and Walking
Belts can abruptly move. To avoid possible serious injury,
keep hands away from the inside of the Treadles and the
edges of the Walking Belts.
7. Loosen the two indicated screws and remove the Left Side Cover.
8. Remove the Drive Belt. Turn the Drive Pulley clockwise while forcing
the Drive Belt to the outside. Belt will come off of the Drive and Motor
Pulley.
Keep fingers out of any pinch opportunities when turning
the Pulleys.
9. With assistance, carefully set the machine upright.
Do not move the machine without aid. Injury to you or
damage to the machine can occur. The Treadles and
Walking Belts can abruptly move. To avoid possible serious
injury, keep hands away from the inside of the Treadles and
the edges of the Walking Belts.
10. Using a 4mm hex wrench and a 13mm (1/2") wrench, remove the 6
indicated screws from the Motor Compartment Cover.
Drive Pulley
Motor Pulley
Left Side Cover
79
Drive Belt
Left Side Cover