Bowflex TreadClimber TC100 Service Manual page 43

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the
!
wall outlet and the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power
cord in a secure location.
1. Unplug the power cord from the machine and wait 5 minutes.
2. Using a #2 Phillips screwdriver, remove the three indicated Phillips
head screws from under the Console Assembly.
3. Pivot and lower the Console Bezel Assembly so it rests on the Button
Pod of the Console Main Assembly.
Note: Do not crimp or damage any Cables
4. Using a #2 Phillips screwdriver, remove the two indicated Phillips head
screws from the Console Main Assembly.
Note: To assist with re-assembly, note the type of screws.
43