Moving And Storing The Machine - Bowflex BXT216 Assembly & Owners Manual

Adjustments

Moving and Storing the Machine

The machine can be moved by one or more persons. Use caution when you move the machine. The treadmill is heavy and can be
awkward. Make sure that your own physical strength is capable of moving the machine. Use a second person if necessary.
1. Before the machine can be moved, inspect the Walking Deck to be sure the Incline setting is at "0". If necessary, adjust the Incline setting to "0".
Be sure the area below the machine is clear before adjusting the incline of the Deck. Fully lower the incline of the Deck after each
workout.
2. Remove the Safety Key and place it in a secure location.
When this machine is not in operation, remove the Safety Key and keep out of the reach of children.
3. Make sure that the power switch is turned Off, and the power cord is disconnected.
4. You must fold the treadmill before you move it. Never move the treadmill if it is not folded.
Never move the machine with the Walking Deck not folded. Rotating or moving parts can pinch, resulting in personal injury.
5. Make sure that there is safe clearance around, on and above your treadmill. Make sure there is no object to spill or cause blockage from the fully
folded position.
Be sure there is adequate height clearance for the raised deck.
6. With your right hand, push and hold down the Walking Deck Release Button. Using the lifting handle found below the rear of the walking belt, lift
the walking deck fully upward and engage the hydraulic lift. The Walking Deck Release Button can be released when the walking deck has moved
about 10 inches (25.4 cm). Be sure that the hydraulic lift is correctly locked in place.
20
Assembly / Owner's Manual