MiiNePort E1/E2-SDK
The next page is regarding serial to Ethernet application, data packing and serial command mode.
RealCOM Mode
ATTENTION
To use RealCOM mode, refer to Chapter 6: Utility Console and Driver Installation to install the RealCOM driver
on Windows or Linux.
TCP alive check time
Setting
0 to 99 min
0 min: The TCP connection is not closed due to an idle TCP connection.
1 to 99 min: The module automatically closes the TCP connection if there is no TCP activity for the given time.
After the connection is closed, the module starts listening for another host's TCP connection.
Max connection
Setting
1, 2, 3, 4
Factory Default
7 min
Factory Default
1
5-8
MiiNePort IDE Development Tool
Recommended Setting
Optional
Recommended Setting
Required