Configuring Port Operation Mode - Port Menu [Mode] - Moxa Technologies CN2510 Series User Manual

Configuring Port Operation Mode – Port Menu [Mode]
Open Port Menu Mode to install NT Real COM mode.
1. To enter CN2510 MAIN MENU, use either Telnet from a network terminal, or connect
directly to CN2510 Async Server with a console terminal. Select ansi/vt100, and then press
Enter. Refer to chapter 2 for more details about how to enter MAIN MENU.
2. The table below is the MAIN MENU of CN2510 Async Server. Before you begin,
familiarize yourself with the cursor movement functions before starting the configuration
process.
Move
Enter to next menu
Back to previous menu
Fast Key
If you have problems using the arrow keys to move the cursor in Windows 9x or NT environment,
click on the Terminal menu, choose Preferences, and then select VT100 Arrows in the
Terminal Preferences window. Click on OK to go back to the MAIN MENU, and then it can
work properly now.
4-2 CN2510 User's Manual
Key
[Up/Down/Left/Right] Arrow Key or [Tab] Key
[Enter] Key
[Esc] Key
Capital letter of the word