MiiNePort E1/E2-SDK
Wizards
Moxa provides wizards to help you modify source codes. Then MiiNePort IDE can create the functions
automatically. Below is the list of wizards (You can find it on the tool bar):
From the left to right, they are:
•
CLI Wizard: Help to add CLI commands
•
Configuration Wizard: Help to make configuration variables
•
SCM Wizard: Help to add SCM command
•
SNMP MIB Wizard Action: Help to add SNMP MIB
•
User App Wizard: Help to create user application (subroutine)
•
Project Wizard: Help to change function and property of project
•
MiiNePort-SDK debug: Debug MiiNePort project
•
Build: Release build and debug build (download firmware)
Modify project dependency
The function is used to modify the settings of MiiNePort project. The section "Create MiiNePort-SDK Project"
includes the description of all settings. Please refer the before section.
The following section will introduce more details about each wizard.
CLI Wizard
This wizard is used to add CLI command. The command-line interface is a tree structure, and each leaf is a
command. You can do some configuration or monitor work of the device by these commands you define.
MiiNePort IDE Development Tool
5-21