Nport Windows Driver Manager; Installing Nport Windows Driver Manager - Moxa Technologies MiiNePort E1-SDK User Manual

MiiNePort E1/E2-SDK
3. When the search is complete, all MiiNePort E1/E2-SDK modules that were located will be displayed in the
Device Search Utility window.
4. To modify the configuration of the highlighted MiiNePort E1/E2-SDK, click the Console icon to open the web
console. This will take you to the web console, where you can make configuration changes.
5. To upload your custom software, click the Upgrade icon to upload your firmware.
ATTENTION
The information below is only for RealCOM mode.

NPort Windows Driver Manager

Installing NPort Windows Driver Manager

The NPort Windows Driver Manager is intended for use with serial ports that are set to RealCOM mode. The
software manages the installation of drivers that allow you to map unused COM ports on your PC to your device
presented by the MiiNePort E1/E2-SDK's serial port. These drivers are designed for use with Windows 98, ME,
NT, and Windows 7. When the drivers are installed and configured, devices that are embedded with the
MiiNePort E1/E2-SDK will be treated as if they are attached to your PC's COM ports.
1. Click the INSTALL COM Driver button in the MiiNePort E1/E2-SDK Installation CD auto-run window to
install the NPort Windows Driver. Once the installation program starts running, click Yes to proceed.
2. Click Next when the Welcome screen opens to proceed with the installation.
Utility Console and Driver Installation
4-5