Starting Miineport Ide; Create Miineport-Sdk Project - Moxa Technologies MiiNePort E1-SDK User Manual

MiiNePort E1/E2-SDK

Starting MiiNePort IDE

MiiNePort IDE is an Eclipse-based integrated software development tool and a step-by-step source-level
debugger that is used to configure the MiiNePort-SDK.
Before running MiiNePort IDE, make sure that the MiiNePort-SDK device is connected to your PC. Please refer
to Chapter 2 for more details.
You may open MiiNePort IDE from the Windows Start menu by clicking Start  Programs  MOXA 
MiiNePort-SDK  MiiNePort-IDE. The MiiNePort IDE window should appear as shown below.

Create MiiNePort-SDK Project

Prior to firmware development, the MiiNEPort-SDK device must be connected to the unit. For developing
customized firmware, MOXA provides a powerful tool called EZStack. You can compose the desired functions
step by step. The following section will show you how to build a customized firmware. First, create a new
project by clicking File -> New -> MiiNePort-SDK Project.
The project wizard will then begin, as shown in the figure below. Just fill your desired value into each field and
click Next to continue. The description of each parameter is shown in the table below.
MiiNePort IDE Development Tool
5-6