Cli; Snmp Agent - Moxa Technologies MiiNePort E1-SDK User Manual

MiiNePort E1/E2-SDK

CLI

For telnet/serial console access, MiiNePort device provides Command-Line Interface (CLI) to do some
configuration or monitor work of the device, such as network configuration, serial parameter configuration, etc.
The programmer can build user-defined CLI by using system CLI APIs, and a function is provided to add the
user-defined CLI to the command list. The project sample code provides a set of default CLI commands is for
user to reference when developing new CLI or for modification to suit for the user application.
Telnet port
Setting
0~65535

SNMP agent

SNMP (Simple Network Management Protocol) is an Internet standard for managing devices on IP networks.
The SNMP consists of two kinds of devices, the managed device that is known as SNMP agent and the SNMP
manager that controls the SNMP agent. MiiNePort will be the SNMP agent, which supports the SNMP V1
(Version 1) and V2 (Version 2).
SNMP version
Setting
V1, V2
Read community
Setting
0 to 40 characters
A read community name is a plain-text password mechanism that is used to authenticate queries to agents of
managed network devices.
Write community
Setting
0 to 40 characters
Factory Default
23
Factory Default
V1, V2
Factory Default
public
Factory Default
private
5-18
MiiNePort IDE Development Tool
Recommended Setting
Required
Recommended Setting
Required
Recommended Setting
Optional
Recommended Setting
Optional