Table of Contents
Advertisement
MiiNePort E1/E2-SDK
4. Alternatively, you can select Input Manually and then manually enter the MiiNePort E1 module's IP
Address, 1st Data Port, 1st Command Port, and Total Ports to which COM ports will be mapped. Click
OK to proceed to the next step. Note that the NPort IP Adress column supports FQDN (Fully Qualified
Domain Name), in which case the IP address will be filled in automatically.
5. COM ports and their mappings will appear in blue until they are activated. Activating the COM ports saves
the information in the host system registry and makes the COM port available for use. The host computer
will not have the ability to use the COM port until the COM ports are activated. Click Yes to activate the COM
ports at this time, or click No to activate the COM ports later.
6. Ports that have been activated will appear in black.
Utility Console and Driver Installation
4-8
Advertisement
Table of Contents
