MiiNePort E1/E2-SDK
Then the MiiNePort will create a folder which is called "Release." Put the firmware into this folder, so that you
can find your firmware in the sub-folder 'objs'.
Please copy the .rom file to your desired path. In this way, you can upgrade the firmware by the Device Search
utility.
Select the target devices and the firmware you saved in the desired path, then click OK to start uploading the
firmware to the MiiNePort devices via Ethernet.
After uploading it successfully, the MiiNePort devices will be updated with all the new firmware.
ATTENTION
For E1, user can upgrade MiiNePort SDK firmware into MiiNePort device from MiiNePort E1 standard firmware
V1.7.
For E2, user can upgrade MiiNePort SDK firmware into MiiNePort device from MiiNePort E2 standard firmware
V1.3.
After upgrading successfully, the setting of MiiNePort will be reset to default.
MiiNePort IDE Development Tool
5-33