MiiNePort E1/E2-SDK
6. Click Finish to complete the installation of NPort Windows Driver Manager.
Using NPort Windows Driver Manager
After you have installed the NPort Windows Driver Manager, you can set up the MiiNePort E1/E2-SDK serial port,
which is connected to the device mainboard, as remote COM ports for your PC host. Make sure that the serial
port on your MiiNePort E1/E2-SDK is already set to RealCOM mode when mapping COM ports with the NPort
Windows Driver Manager.
1. Go to Start NPort Windows Driver Manager NPort Windows Driver Manager to start the COM
mapping utility.
2. Click the Add icon.
3. Click Search to search for the MiiNePort E1 modules. From the list that is generated, select the server to
which you will map COM ports, and then click OK.
Utility Console and Driver Installation
4-7