MiiNePort E1/E2-SDK
6. Click Finish to complete the installation of the Device Search Utility.
Device Search Utility Configuration
The Broadcast Search function is used to locate all MiiNePort E1/E2-SDK modules that are connected to the
same LAN as your computer. After locating a MiiNePort E1/E2-SDK, you will be able to change its IP address.
Since the Broadcast Search function searches by MAC address and not IP address, all MiiNePort E1/E2-SDK
modules connected to the LAN will be located, regardless of whether or not they are part of the same subnet
as the host.
1. Start the Device Search Utility and then click the Search icon.
2. The Searching window indicates the progress of the search.
Utility Console and Driver Installation
4-4