Table of Contents
Advertisement
MiiNePort E1/E2-SDK
Build project
The function is used to build a customized firmware which you develop. This function can build two different
types of firmware. If you select debug type, the firmware will be downloaded onto the MiiNePort. Then you can
debug step by step. On the other hand, if you build release version firmware, it will generate a customized
firmware without debug message. Besides, it won't write onto the MiiNePort, and you can upgrade it into the
MiiNePort by utility.
Upload debug version firmware to MiiNePort
After compiling the source code, you have to upload your debug firmware file to the MiiNePort to verify all
functions. Moxa provides a source-level debug tool. In this way, you can debug it step by step to find your
programming issues.
First, you need to build a debug firmware, and then the MiiNePort will create a folder, which is called "Debug,"
and put the firmware into this folder. Click the debug button to upload firmware onto the MiiNePort by a USB
port automatically.
After uploading successfully, you can start to debug step by step.
Debug current active project
The function is used to debug a MiiNePort project. Your project will be downloaded into the MiiNePort SDK and
then it will execute your project. In addition, if you set break point, you can debug step by step.
Upload your customized firmware to MiiNePort
After the development of your customized firmware has been completed, you have to deploy your firmware file
to the MiiNePort. Please remember connect an Ethernet cable to the MiiNePort first, then use the NPort Search
Utility, as it can help you upload your firmware to the MiiNePort easily.
First, you need to build a release firmware, then the MiiNePort IDE will ask you to confirm if you want to reset
the default to MiiNePort device. Click Yes to go to the next step.
MiiNePort IDE Development Tool
5-32
Advertisement
Table of Contents
