Table of Contents
Advertisement
MiiNePort E1/E2-SDK
The Next page is network settings, you can assign IP configuration in this page.
Device name
Setting
1 to 40 characters
This option can be used to specify the location or application of the module, which may be useful when
managing more than one module on the network.
IP configuration
Method
Static
DHCP
BOOTP
IP configuration is a required field. The default setting is Static.
ATTENTION
In Dynamic IP environments, the module will attempt to obtain an IP address from the DHCP or BOOTP server
three times at 30-second intervals. The timeout for the first try will be 1 second, the second try will be 3
seconds, and the last try will be 5 seconds.
If the DHCP/BOOTP Server is unavailable, the module will use the default IP address (192.168.127.254),
netmask, and gateway settings.
IP Address
Setting
E.g., 192.168.1.1
(IP addresses of the
form x.x.x.0 and
x.x.x.255 are invalid.)
An IP address is a number assigned to a network device, such as a computer, as a permanent address on the
network. Computers use the IP address to identify and talk to each other over the network. Choose a proper IP
address that is unique and valid in your network environment.
Factory Default
[model name]_[Serial No.]
Function Definition
User defined IP address, Netmask, Gateway.
DHCP Server assigned IP address, Netmask, Gateway, DNS
BOOTP Server assigned IP address
Factory Default
192.168.127.254
5-14
MiiNePort IDE Development Tool
Recommended Setting
Optional
Recommended Setting
Required
Advertisement
Table of Contents
