AXIOMTEK SBC84620 Series User Manual page 60

®
SBC84620 AMD Geode GX3 All-in-One Capa Board User's Manual
Suspend Mode
After the selected period of system inactivity (1 minute to 1 hour),
all devices except the CPU shut off. The default value is "Disabled".
Disabled System will never enter SUSPEND mode
Defines the continuous idle time before the system
1/2/4/6/8/10/2
entering SUSPEND mode.
0/30/40
If any item defined in (J) is enabled & active,
Min/1 Hr
SUSPEND timer will be reloaded
Modem Use IRQ
3, 4, 5, 7, 9, For external modem, 3 or 4 will be used for card
10, 11, NA type modem. It is up to card definition. Default is 3.
Soft-Off by PWR-BTTN
This option only works with systems using an ATX power supply. It
also allows the user to define which type of soft power OFF
sequence the system will follow. The default value is "Instant-Off".
This option follows the conventional manner systems
perform when power is turned OFF. Instant-Off is a soft
Instant-Off
power OFF sequence requiring only the switching of the
power supply button to OFF
Upon turning OFF system from the power switch, this
option will delay the complete system power OFF
sequence by approximately 4 seconds. Within this delay
Delay 4 Sec.
period, system will temporarily enter into Suspend Mode
enabling you to restart the system at once.
PWRON After PWR-Fail
This option allows you to select the type of power loss function.
The options available are On, Off. The default value is "Off".
Press <Esc> to return to the Main Menu page.
54
Award BIOS Utility