AXIOMTEK SBC84620 Series User Manual page 51

®
SBC84620 AMD Geode GX3 All-in-One Capa Board User's Manual
Quick Power On Self Test
This option speeds up Power on Self Test (POST) after you turn on
the system power. If set as Enabled, BIOS will shorten or skip
some check items during POST. The default setting is "Enabled".
Enabled
Disabled
First/Second/Third Boot Device
These items allow the selection of the 1
the system will search for during its boot-up sequence. The wide
range of selection includes Floppy, LS120, ZIP100, HDD0~3, SCSI,
and CDROM.
Boot Other Device
This item allows the user to enable/disable the boot device not
listed on the First/Second/Third boot devices option above. The
default setting is "Enabled".
Boot Up NumLock Status
Selects power on state for NumLock. The default value is "On".
Gate A20 Option
The default value is "Fast".
Normal
The A20 signal is controlled by keyboard controller
or chipset hardware.
Fast
Default: Fast. The A20 signal is controlled by Port
92 or chipset specific method.
Typematic Rate Setting
This determines the typematic rate of the keyboard. The default
value is "Disabled".
Enable typematic rate and typematic delay
Enabled
programming
Disable typematic rate and typematic delay
Disabled programming. The system BIOS will use default value
of these 2 items and the default is controlled by
keyboard.
Typematic Rate (Chars/Sec)
This option refers to the number of characters the keyboard can
type per second. The default value is "6".
Award BIOS Utility
Enable Quick POST
Normal POST
st nd
, 2 , and 3
rd
devices that
45