Jumper Settings - AXIOMTEK SBC84620 Series User Manual

®
SBC84620 AMD Geode GX3 All-in-One Capa Board User's Manual
2.3

Jumper Settings

The SBC84620 Series is configured to match the needs of your
application with the proper jumper settings. The table below is a
summary of all the jumpers and their corresponding functions onboard
the SBC84620 Series. The succeeding tables show the correct jumper
settings for the onboard devices.
Jumper Default Setting
Audio Line Out/Speaker Out: Line
JP1
Out
JP2 LCD Voltage select : 3.3V
JP3 Clear CMOS Setting : Normal
Compact Flash Power Select :
JP4
3.3V
JP5 COM1 Mode Select: RS-232
COM1 Mode
JP6
Select
JP7 COM1 Mode Select: RS-232
COM2 Mode
JP8
Select
JP9 Compact Flash Select : Slave
JP10 COM1 Mode Select: RS-232
COM4 Mode
JP11
Select
COM3 Mode
JP12
Select
Jumpers and Connectors
Jumper Setting
Short 1-3, 2-4
Short 1-2
Short 1-2
Short 1-2
Short 3-5,4-6
CN13 Pin 1:
Short 3-5
DCD
CN13 Pin 9: RI Short 4-6
Short 3-5,4-6
CN10 Pin 1:
Short 3-5
DCD
CN10 Pin 8: RI Short 4-6
Short 1-2
Short 1-2
CN10 Pin 11:
Short 3-5
DCD
CN10 Pin 18: RI Short 4-6
CN12 Pin 1:
Short 3-5
DCD
CN12 Pin 8: RI Short 4-6
9