Timer, Weekly timer, Energy saving
The settings for Timer, Weekly timer, and Energy saving operation can be made from the remote controller.
Press button 4 ( MENU ) to go to the Main menu, and move the cursor to the desired setting with button 7 ( F1 )
or 8 ( F2 ). Refer to the Instruction Book of the remote controller for further information.
Operation On/Off times can be set in 5-minute increments.
Auto-Off time can be set to a value from 30 to 240 in 10-minute increments.
Operation On/Off times for a week can be set.
Up to eight operation patterns can be set for each day.
Automatic return to the preset temperature
The units operate at the preset temperature after performing energy-save operation for a preset time period.
The preset time can be set to a value from 30 to 120 in 10-minute increments.
Setting the energy-saving operation schedule
The start/stop times to operate the units in the energy-save mode for each day of the week and the energy-saving
rate can be set.
Up to four operation patterns can be set for each day.
The times can be set in 5-minute increments.
The energy-saving rate range is 0% and 50 to 90% in 10% increments.
OU silent mode