Controller operation-Function settings
Timer
Auto-Off timer
Button operation
1
On/Off timer
On
Repeat
Auto-Off
Stop in
Setting display:
Cursor
2
Auto-Off
Stop in
Select:
Cursor
3
Auto-Off
Stop in
Select:
Cursor
26
Timer
Yes
Off
No
No
--- min
Auto-Off timer
No
Yes
min
Cursor
Auto-Off timer
No
Yes
min
Time
Bring up the Timer setting screen.
(Refer to page 24.)
Select "Auto-Off", and press the SELECT
button.
The Auto-Off timer will not work in the following cases:
when Auto-Off timer is disabled, during an error, during
check (in the service menu), during test run, during
remote controller diagnosis, when the clock is not set,
during Function setting, when the system is centrally
controlled (when On/Off operation from local controller is
prohibited).
The current settings will appear.
Move the cursor to the "Auto-Off" or "Stop in ---
min" with the F1 or F2 button.
Change the setting with the F3 or F4 button.
• Auto-Off: No (disable)/Yes (enable)
Stop in --- min: Timer setting (The settable
•
range is 30 to 240 minutes in
10-minute increments.)
Main