Installation
NOTE
9.
If installing more than one IBC, repeat Steps
paragraph
4.4.1 Installing Battery Detect Interface
NOTE
Figure 13. Wiring Channel Location
Wire Tie
Anchors
30
Eaton 93PM Integrated Battery Cabinet-Small (IBC-S) Installation Manual 164000305—Rev 06
Route the battery wiring between the UPS and subsequent IBCs through the bottom of
the adjacent IBC.
4.4 Installing IBC Interface
Internal battery strings are to be connected by an authorized Eaton Customer Service
Engineer at system startup.
Step 2
through
Step 8
Wiring; otherwise, proceed to paragraph
Connections.
for each IBC, and then proceed to
Wiring
Channel