Siemens Acuson S1000 Instructions For Use Manual page 225

To
Pan the volume
Cycle through the slices of an
MPR
Change the active plane view
3. Identify an area of interest.
To
Identify an area of interest by
drawing a line
I n s t r u c t i o n s f o r U s e
Do this
a. Activate the pan function.
● Select Pan.
○ For systems without a touch screen, press NEXT to select Pan.
b. Drag the volume to the required location.
c. To restore the previous position of the volume, select Reset Display on
the image menu.
a. Choose a method:
– Rotate [X], [Y], or [Z] on the control panel to cycle through the
coronal, sagittal, or axial MPR, respectively.
– Drag the required axis on the image.
b. To restore the previous display, select Reset Display.
 Select a plane.
● Rotate [X], [Y], or [Z] to select the coronal, sagittal, or axial view,
respectively.
○ For systems without a touch screen, rotate the scroll wheel to rotate
the selected plane.
Do this
a. Activate the drawing tool.
● Select Line Segmentation.
○ For systems without a touch screen, click Line Segmentation on
the image menu.
b. Click the image to position the starting and ending points of a line
across the area of interest.
The system displays an outline around the area identified by the line
segmentation and updates the Navigator with a corresponding entry.
9 e S i e F u s i o n I m a g i n g
9 - 1 9