Siemens Acuson S1000 Instructions For Use Manual page 364

A p p e n d i x D O n - s c r e e n C o n t r o l s
Selection Description
DTI
Enables or disables Doppler Tissue Imaging, which illustrates movement of tissue.
Note: For systems without a touch screen, the selection is assigned to a soft key.
Trace Update Trace Update Styles
Styles
Selects an update style or simultaneous display for the 2D-mode image and the Doppler
spectrum. An update style pauses the Doppler spectrum and refreshes the 2D-mode image at
the selected interval.
 2D-Lv/D-Lv
 2D-Lv/D-Frz
 D-Lv/2D-Frz
 D-Lv/2D-Lv
 D-Lv/2D-EOS (end of sweep)
 D-Lv/2D-2s (every two seconds)
 D-Lv/2D-4s (every four seconds)
 D-Lv/2D-8s (every eight seconds)
Note: The selections available depend on the active image.
Auto Stats Auto Statistics
Enables or disables the display of Doppler statistics.
 On
 Off
Auto Stats On (Available only for pulsed wave Doppler)
Selects the trace settings to use data above the baseline, below the baseline, or on both sides
of the baseline.
 Only Above Baseline
 Only Below Baseline
 Above and Below
Full Screen Trace Full Screen Trace
Activates a full-screen format for the Doppler spectrum.
Note: For systems without a touch screen, the selection is assigned to a button:
D - 2 0 I n s t r u c t i o n s f o r U s e