Siemens Acuson S1000 Instructions For Use Manual page 425

Maintenance
Dialog Box
Selection Description
Auto-adjust Enables the assignment of a different score to the same segment (view) in each stage.
segments
Print colored Prints the report in color when checked.
LV Trace Line
Solid Line Configures the system to display a solid line when you create an LV trace.
Dotted Line Configures the system to display a dotted line when you create an LV trace.
Printer Select a printer from the drop-down box.
QT-Time Table
Heartrate Allows you to enter a heart rate. When a heart rate and systolic duration are both entered, you
can add this pair of values to the QT-Time Table.
Syst. Duration
Allows you to enter a systolic duration. When a heart rate and systolic duration are both
entered, you can add this pair of values to the QT-Time Table.
Reset table Restores the default values in the QT-Time Table.
Update Adds the entered heart rate and systolic duration to the QT-Time Table.
Delete Removes the selected heart rate and systolic duration pair from the QT-Time Table.
Beep during When checked, indicates with an audible tone that acquisition is complete during a continuous
acquisition stage.
Show View When checked, enables selection with the scroll wheel of another view in a continous stage.
control
Factory Settings Applies factory defaults for systolic durations and heart rates.
Save Saves changes.
Protocol Editor Displays the Protocol Editor dialog box.
Quit Exits the Maintenance dialog box.
I n s t r u c t i o n s f o r U s e
A p p e n d i x E A d v a n c e d F e a t u r e C o n t r o l s
E - 3 1