To adjust the ECG trace:
●
Select More and then select Physio.
○
For systems without a touch screen, press Physio on the keyboard.
To
Adjust the wave
amplitude of the trace
Position the trace up or
down on the image
screen
Adjust the scrolling
speed of the trace
I n s t r u c t i o n s f o r U s e
Do this
(Available only when Manual Gain is enabled on the system configuration menu)
System Config > Physio System
Increase or decrease the wave amplitude.
● Rotate [Gain] to select Gain Min or Gain Max.
Gain.
○ For systems without a touch screen, select Increase Gain or Decrease Gain on
the image menu.
Increase Gain.
Reposition the trace.
● Rotate [Position] to select Position Min or Position Max.
Position.
○ For systems without a touch screen, select Move ECG Up or Move ECG Down.
Move ECG Up.
(Available during 2D-mode only)
Select a setting.
● Rotate [Sweep Speed].
○ For systems without a touch screen, rotate [Menu].
Note: During Doppler or M-mode, the trace has the same scrolling speed as the
Doppler spectrum or M-mode sweep.
8 P h y s i o l o g i c F u n c t i o n
Decrease Gain.
Move ECG Down.
8 - 5