Siemens Acuson S1000 Instructions For Use Manual page 427

Protocol Editor
Dialog Box
Selection Description
Start Stage Specifies when stage timers are activated for all stages configured to display the timer.
Timers
at beginning of Stage
Starts the timer when the stage is activated.
upon Clip Capture
Starts the timer when acquisition of the first image for the stage begins.
Trigger
Specifies the heart cycle portion(s) captured by the protocol.
R-R Systolic captures only the systolic portion of the heart cycle.
R-R Full captures the full heart cycle (systolic and diastolic portions).
Note: The captured heart cycle segments (portions) can be edited. You can select loop
segments for display or you can reposition the review markers.
WMS model Lists the WMS models available for selection to be used by default in the protocol.
New Clears the Protocol Name selection and allows you to create a new protocol.
Load Displays the Select Protocol to load dialog box and then displays information about the
selected protocol within the Protocol Editor dialog box.
Save
Saves changes.
Delete
Removes the protocol from memory.
Quit Exits the Protocol Editor dialog box.
I n s t r u c t i o n s f o r U s e
A p p e n d i x E A d v a n c e d F e a t u r e C o n t r o l s
E - 3 3