Removing Printing Jams - Ricoh SP 330SN User Manual

See the section identified by the message and remove the jammed paper accordingly.

Removing Printing Jams

• The inside of this machine becomes very hot. Do not touch the parts labeled " " (indicating a
hot surface).
• Some of this machine's internal components get very hot. For this reason, take care when
removing misfed paper. Not doing so could result in burns.
• Jammed paper may be covered in toner. Be careful not to get toner on your hands or clothes.
• Toner on prints made immediately after clearing a paper jam may be insufficiently fused and may
smudge. Make test prints until smudges no longer appear.
• Do not forcefully remove jammed paper, as it may tear. Torn pieces remaining inside the machine
will cause further jams and possibly damage the machine.
• Paper jam can cause pages to be lost. Check your print job for missing pages and reprint any
pages that did not print out.
Removing jammed paper from Tray 1
If "Internal Misfeed", "Misfeed: Tray 1", or "Misfeed: Tray 2" appears on the display, follow the
procedure below to remove it.
The following example explains the removing procedure for the standard paper tray (Tray 1).
The same procedure applies to remove jammed paper from Tray 2.
1. Pull tray 1 halfway out, and check for jammed paper. If there is jammed paper, remove it
carefully.
DYG288
Removing Paper Jams
405