Ricoh SP 330SN User Manual page 106

3. Printing Documents
3. Press the [Locked Print] tab.
You can also display the Locked Print file list by pressing [Check] on the [Status] tab.
4. Select the file you want to print.
Identify the Locked Print file by checking its time stamp and user ID.
5. Press [Print Jobs].
6. Press the [Locked Print Password:] box.
To use the application to start printing a locked print file, hold a smart device on which the
application corresponding to the machine is running.
7. Enter the password, and then press [OK].
8. Press [OK].
When using the four-line LCD panel model
When there is a Locked Print file stored in the machine, "Locked Print Job" and "Press User Tools
key." appears on the machine's control panel display.
Use the following procedure to unlock and print the Locked Print file.
1. Press the [User Tools] key.
2. Press the [ ] or [ ] key to select the file you want to print, and then press the [OK]
key.
Identify the Locked Print file by checking its time stamp and user ID.
3. Select [Print].
4. Enter the password using the number keys.
Press the [Back] key to discard the current digits and exit to the previous level of the menu tree.
To use the application to start printing a locked print file, hold a smart device on which the
application corresponding to the machine is running.
5. Press the [OK] key.
The Locked Print file is printed.
• You cannot print a Locked Print file while the machine is currently printing. The machine beeps if
you try to do so.
• While entering a password using the control panel, the machine cannot process other print jobs.
104