Ricoh SP 330SN User Manual page 429

Problem
The backs of printed sheets are
blemished.
The Data In indicator is not flashing
or lit.
Solid lines are printed as broken
lines.
Fine dot patterns do not print.
If rubbed with your finger, the print
smears.
• When removing a jammed sheet, the inside of the printer
may have become dirty. Print several sheets until they
come out clean.
• If document size is larger than paper size, e.g. A4
document on B5 paper, the back of the next printed sheet
may become dirty.
If the Data In indicator is not flashing or lit, the data is not
being sent to the printer.
If the printer is connected to the computer using the interface
cable.
Check the port connection setting is correct.
Network Connection
Contact your network administrator.
Only when using PostScript 3
Change the [Dithering] setting in the printer driver's
dialog box.
See the printer driver Help.
Only when using PostScript 3
Change the [Dithering] setting in the printer driver's
dialog box.
See the printer driver Help.
The setting of the paper may not be correct. For example,
although thick paper is used, the setting for thick paper may
not be specified.
• Check the paper settings of this printer.
See page 56 "Loading Paper".
• Check the paper settings of the printer driver.
See the printer driver Help.
Printer Problems
Solution
427