Ricoh SP 330SN User Manual page 22

1. Guide to the Machine
No.
3 Input Tray for the ADF
4 Auto Document Feeder
(Exposure Glass Cover)
5 External Telephone Connector
(only the Touch Panel Model)
6 G3 (analog) Line Interface
Connector (only the Touch Panel
Model)
7 USB Port for wireless LAN option Insert the wireless LAN option to connect with a wireless
8 USB Port
9 Ethernet Port
10 Tray 1 Rear Cover
11 Rear Cover
12 Side Fence
13 Bypass Tray
14 Tray 1
15 End Fence
16 Front Cover
17 USB Flash Disk Port
18 Standard Tray
20
Name
Place stacks of originals here. They will feed in
automatically. This tray can hold up to 35 sheets of
plain paper.
The ADF is integrated with the exposure glass cover.
Open this cover to place originals on the exposure
glass.
For connecting an external telephone.
For connecting a telephone line.
LAN when the machine's power is turned off.
For connecting the machine to a computer using a USB
cable.
For connecting the machine to the network using a
network interface cable.
This cover opens when you load paper longer than A4
in Tray 1.
Open this cover to remove jammed paper or to lower
the levers inside before printing on envelopes.
Adjust this fence to the paper size.
This tray can hold up to 50 sheets of plain paper.
This tray can hold up to 250 sheets of plain paper.
Adjust this fence to the paper size.
Open this cover to replace the print cartridge or remove
jammed paper.
Insert a USB flash memory device to store scanned files
using the Scan to USB function.
Printed paper is output here. Up to 50 sheets of plain
paper can be stacked here.
Description