Specifying Scan Settings For Faxing - Ricoh SP 330SN User Manual

Specifying Scan Settings for Faxing

Adjusting image density
This section describes how to adjust image density for the current job.
There are three image density levels. The darker the density level, the darker the printout.
1. Press the [Home] key.
2. Press the [Fax] icon on the [Home] screen.
3. Press [TX Settings].
4. Press [ ] or [ ] to select the desired density level, and then press [OK].
• You can change the machine's default [Density] setting to always scan with a specific density level.
For [Density], see page 247 "Fax Features Settings (When Using the Touch Panel Model)".
Specifying the resolution
This section describes how to specify the scan resolution for the current job.
There are three resolution settings:
Standard
Select this when the original is a printed or typewritten document with normal-sized characters.
Detail
Select this when the original is a document with small print.
Photo
Select this when the original contains images such as photographs or shaded drawings.
DYG322
Sending a Fax
215